- Home
- >
- Mercury CA & Epoxy
- >
- 1 oz Performance CA, Mercury M100XF
1 oz Performance CA, Mercury M100XF
SKU:
M100XF-1
$8.25
$8.25
Unavailable
per item
Mercury's High Performance CA is engineered for enhanced adhesion on difficult to glue material, such as oily wood (Cocobolo, Olive, Teak, etc.). It's still recommended to wipe the surface with acetone before application.
Additionally, it is has reduced odor/fumes so it is less irritating than regular CA. Because of this, it also makes a great top finish for your pens.
It's not a full Low Odor/Low Fume CA like the M100F, but it's not as expensive either.
Although the M100XF only comes in 1oz bottles, it will last a long time since you only need a drop or two per coat. With just a few coats you can have a gorgeous glass-like finish. A little dab'll do ya.
This is great top coat for your wood pens. Depending on the number of coats and how highly polished, it can provide a somewhat natural to a glass-like feel for your finished work.
Mercury Adhesives manufactures their CA here in the USA, in Atlanta, GA. It is a medical grade CA that is highly concentrated and 99.9% pure. For finishing pens, just a drop or two is all that is needed for each coat.
There are different formulations for pen makers. Thin, Medium, Low Odor/Fume, & a unique High Performance that is great for oily wood. Plus, it's has reduced fumes for finishing.
Another unique feature isn't with the CA, but with the bottle. Mercury's Low Odor/Low Fume CA is packaged in clog free bottles. There are three sealing points within the cap, including a steel pin to help keep the tip clear & open. If CA does build up on the tip or cap, just soak it in acetone for little while. These bottles can be refilled and reused many times.
Additionally, it is has reduced odor/fumes so it is less irritating than regular CA. Because of this, it also makes a great top finish for your pens.
It's not a full Low Odor/Low Fume CA like the M100F, but it's not as expensive either.
Although the M100XF only comes in 1oz bottles, it will last a long time since you only need a drop or two per coat. With just a few coats you can have a gorgeous glass-like finish. A little dab'll do ya.
This is great top coat for your wood pens. Depending on the number of coats and how highly polished, it can provide a somewhat natural to a glass-like feel for your finished work.
Mercury Adhesives manufactures their CA here in the USA, in Atlanta, GA. It is a medical grade CA that is highly concentrated and 99.9% pure. For finishing pens, just a drop or two is all that is needed for each coat.
There are different formulations for pen makers. Thin, Medium, Low Odor/Fume, & a unique High Performance that is great for oily wood. Plus, it's has reduced fumes for finishing.
Another unique feature isn't with the CA, but with the bottle. Mercury's Low Odor/Low Fume CA is packaged in clog free bottles. There are three sealing points within the cap, including a steel pin to help keep the tip clear & open. If CA does build up on the tip or cap, just soak it in acetone for little while. These bottles can be refilled and reused many times.
Sold out
© COPYRIGHT 2016 BY ROBERT KULP
ALL RIGHTS RESERVED
ALL RIGHTS RESERVED